Logitech Squeezebox Ft - Manual (Page 25)

3 Squeezebox™ Owner’s Guide
How do I find the Ip address of the computer where I have installed
SlimServer?
On Windows®: Click Start > Run, type in cmd and hit enter. In the DOS window, type
ipconfig and hit enter.
On Mac OS X: Go to System Preferences > Network. Under the ‘Show:’ drop-down, pick
the network interface you are using, then click TCP/IP. Your IP address will be displayed.
On Linux® or UNIX®: Open up a shell and type ifconfig and hit enter.
Squeezebox can’t connect to my computer running SlimServer.
This could be due to a firewall being active on the computer.
Macintosh®: You will have to create a new exception in the built-in firewall to allow the
Squeezebox to connect to SlimServer. To do this:
. Open System Preferences > Sharing, and click ‘Firewall’
. Click ‘New...’ to create a new rule
3. For ‘Port Name:’ choose ‘Other’
. For ‘Port Number, Range or Series:’ type ‘383, 000’
5. For ‘UDP Port Number(s):’ specify ‘383’ (Mac OS 0. only)
6. For ‘Description:’, type ‘SlimServer’
7. Click OK, and ensure that your new exception is checked on
Windows®: Windows® XP Service Pack turns on a built-in firewall by default. You will
need to configure the firewall to allow access to SlimServer. To do this:
. Go to Control Panel
. Click Security Center
3. Click Windows Firewall under ‘Manage security settings for:’
. Click the Exceptions tab
Add an exception for the following three ports by clicking ‘Add Port...’:
• Port number: 383 (TCP) - Name: SlimServer Control