Lantronix 900-422 - Manual (Page 66)

9: Setup Mode: Advanced Settings
XPress DR+ User Guide 66
Disable TFTP Firmware Update (N) : _
Disable Port 77FE (Hex)
Note: If you choose to disable this option, keep in mind that disabling both
Telnet Setup and Port 77FE will prevent users from accessing Setup Mode from
the network.
Port 77FE is a setting that allows DeviceInstaller, Web-Manager, and custom programs
to configure the unit remotely. You may wish to disable this capability for security
purposes.
Disable Port 77FEh (N) ? _
The default setting is the N (No) option, which enables remote configuration. You can
configure the unit by using DeviceInstaller, Web-Manager, Telnet, or serial configuration.
The Y (Yes) option disables remote configuration and web sites.
Note: The Y (Yes) option disables many of the GUI tools for configuring the unit,
including the embedded Web-Manager tool.
Disable Web Server
This setting defaults to the N (No) option. The Y (Yes) option disables the web server.
Disable Web Server (N) ? _
Disable Web Setup
The Y (Yes) option disables configuration using the Web-Manager. This setting defaults
to the N (No) option.
Disable Web Setup (N) ? _
Disable ECHO Ports
This setting controls whether port 7 echoes characters it receives.
Disable ECHO ports (Y) ? _
Enable Enhanced Password
This setting defaults to the N (No) option, which allows you to set a 4-character password
that protects Setup Mode by means of Telnet and web pages. The Y (Yes) option allows
you to set an extended security password of 16-characters for protecting Telnet and web
page access.
Enable Enhanced Password (Y) ? _