Lincoln Electric Stick Electrode Welding C2.410 - Manual (Page 32)

-32-
Flat Fillet W
elds
Also see High Deposition Procedures, page 11.
(1) First pass only. On later passes, adjust arc speed to obtain proper bead size.
(2) Total for all passes. 100% operating factor.
Note: E7018 can produce code quality welds. E7018 procedures are used when E7028 is not available
and for electrodes E8018 and E11018.
No. of Passes 1 1 1 1 1 2 4 5
Leg Size – L (in.) 5/32 3/16 1/4 5/16 3/8 1/2 5/8 3/4
Electrode/AWS Class Jet LH-78MR, Jetweld LH-70, Excalibur 7018, Excaliibur 7018-1
Diameter (in.) 3/16 7/32 7/32 1/4 1/4 1/4 1/4 1/4
Current (Amps) 240 275 275 350 350 350 350 350
Polarity AC AC AC AC AC AC AC AC
Arc Speed In./Min. (1) 14 13.5 9.5 7.5 6.5 7.5 7 7
Ft. of Weld/Hr. (2) 70 68 48 38 33 17 12 8
Lbs. of Elec./Ft. of .109 .132 .195 .272 .409 .727 1.14 1.50
With E7018 Electrode
L
4
5
L
2
1
3