Lexmark X658 MFP - Manual (Page 10)

Selection Paper/envelope
dimensions Dimensions by area (pels) 1
Page size
parameters
2
Name mm inches A B C D E F G H I
300 Oficio
(Mexico) 216 x 340 8.5 x 13.4 5100 8040 4800 7800 150 120 0 100 100
Envelope
90 DL 220 x 110 8.66 x 4.33 2598 5196 2314 4960 142 118 0 100 100
91 C5 229 x 162 9.02 x 6.38 3826 5408 3542 5172 142 118 0 100 100
99 5 , 100 B5
Envelope 250 x 176 9.84 x 6.93 4156 5904 3872 5668 142 118 0 100 100
600 Other
Envelope 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100
89 9 (Com 9) 225 x 98 8.875 x 3.875 2324 5324 2024 5084 150 120 0 100 100
81 10 (Com
10) 241 x 105 9.5 x 4.125 2474 5700 2174 5460 150 120 0 100 100
80 7 3/4
(Monarch) 98 x 191 3.875 x 7.5 2324 4500 2024 4260 150 120 0 100 100
1 Pel dimensions are for 600 dpi.
2 Page Size Parameters are explained in the Page Control table in the PCL chapter in the Printer Language and Interfaces
Technical Reference.
3 The width of the logical page for A4 paper can be changed from the printer control panel or your software application.
4 For the Universal paper size, the area dimensions are listed in pel ranges.
5 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical
paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039.
Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more information,
see “Print Area Menu Item” in the PCL chapter in the Printer Language and Interfaces Technical Reference.
Printer Control Language (PCL) page formatting
10