Lan phy chip (vitesse cis8201), Universal serial bus, Ide facilities – Lok8u K8SLI User Manual
Page 9: Serial ata2 facilities, I/o facilities, Bios, K8sli
K8SLI
3
LAN PHY Chip (Vitesse CIS8201):
z
10/ 100/ 1000 Mbps Ethernet support
Universal Serial Bus:
z
Supports up to eight USB ports for USB interface devices
z
Supports USB 2.0 Enhanced Host Controller Interface (EHCI) and dual USB 1.1 Open
Host Controller Interface (OHC1)
IDE Facilities:
z
Supports Ultra ATA 66, Ultra ATA 100, Ultra ATA 133
z
Supports IDE interface with CD-ROM
z
Supports high capacity hard disk drives
z
Supports installation of up to 4 drives, with separate IDE connections for Primary and
Secondary connectors
Serial ATA2 facilities:
z
Compatible with SATA 2
z
Supports Serial ATA specification of 300 MB/sec transfers
z
Supports SATA RAID 0/ 1/ 0+1/ JBOD mode
I/O facilities:
z
One multi-mode Parallel Port capable of supporting the following specifications:
1. Standard & Bi-direction Parallel Port
2. Enhanced Parallel Port (EPP)
3. Extended Capabilities Port (ECP)
z
Supports one serial port 16550 UART in the back panel and one optional onboard serial
port header (COM2).
z
Supports one SPDIF-OUT RCA port and an SPDIF IN/OUT onboard header
z
Supports Infrared Data Transmissions using IrDA(optional)
z
Supports PS/2 mouse and PS/2 keyboard
z
Supports 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB floppy disk drives
z
Game port compatible (optional)
BIOS:
z
Phoenix-Award™ BIOS
z
Supports APM1.2
z
Supports ACPI power management