Lok8u K8SLI - Manual (Page 16)

K8SLI
10
Back Panel Configuration
PS/2 Mouse & PS/2 Keyboard Connectors: KB/MS
This mainboard provides a standard PS/2 mouse connector and PS/2 Keyboard connector. The pin
assignments are described below:
Serial and Parallel Interface Ports
This mainboard comes equipped with one serial port, one parallel port and one SPDIF out RCA port.
There is also one optional onboard serial port header (COM2).
Parallel Interface Port: PRT
The parallel port on your system has a 25-pin, DB25 connector that is used to interface with parallel
printers and other devices using a parallel interface.
The Serial Interface: COM1
The serial interface port is sometimes referred to as an RS-232 port or an asynchronous
communication port. Mice, modems and other peripheral serial devices can be connected to this port.
Pin Assignment Pin Assignment
1 Data 4 +5 V (fused)
2 No connect 5 Clock
3 Ground 6 No connect
PS/2 Mouse
PS/2 Keyboard