Lok8u K8SLI - Manual (Page 38)

K8SLI
32
Integrated Peripherals
Init Display First
With systems that have multiple video cards, this option determines whether the primary display uses
a PCI slot or an PCIEx slot. Options: PCIEx、PCI Slot (default)
IDE Function Setup
If you highlight the “IDE Function Setup” label and then press the enter key, it will take you to a
submenu with the following options:
OnChip IDE Channel 0/1
The mainboard chipset contains a PCI IDE interface with support for two IDE channels. Select
“Enabled” to activate the first and/or second IDE interface. Select “Disabled” to deactivate an
interface if you are going to install a primary and/or secondary add-in IDE interface.
Options: Enabled (default)、Disabled
Primary/Secondary/Master/Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for each of the IDE
devices that the onboard IDE interface supports. Modes 0 to 4 will increase performance
incrementally. In Auto mode, the system automatically determines the best mode for each device.
Options: Auto (default)、Mode0、Mode1、Mode2、Mode3、Mode4.