Printing transparencies, Printing a banner – Lexmark 1500 User Manual
Page 25

Note: To prevent smudging, remove each iron-on transfer as it exits, and let it dry before stacking.
Related topics:
•
“Using the Page Setup dialog” on page 49
•
“Using the Print dialog” on page 50
Printing transparencies
1
Load transparencies.
2
Customize the settings as needed in the Page Setup dialog.
a
With a document open, click File
Page Setup.
b
From the “Format for” pop-up menu, choose 1500 Series.
c
From the Paper Size pop-up menu, choose a paper size.
d
Choose an orientation.
e
Click OK.
3
Customize the settings as needed in the Print dialog.
a
From the software application, click File
Print.
b
From the Printer pop-up menu, choose 1500 Series.
c
From the third pop-up menu from the top, choose Quality & Media.
•
From the Paper Type pop-up menu, choose Transparency.
•
Select a print quality.
Note: Higher print quality settings result in better quality documents but may take longer to print.
d
Click Print.
Note: To prevent smudging, remove each transparency as it exits, and let it dry before stacking. Transparencies
may require up to 15 minutes to dry.
Printing a banner
1
Remove all paper from the paper support.
2
Tear off only the number of pages needed for the banner (up to 20 sheets).
3
Place the required stack of banner paper on a flat surface behind the printer.
4
Load only the first page of banner paper into the paper support with the leading edge of the banner going into
the printer.
W
F
I
I
P
R
IN
T
IN
G
5
Adjust the left and right paper guides.
Printing
25