beautypg.com

Stopping and securing the vehicle, Removing the spare tire and jack, Tire change procedure – Lincoln 2011 MKT User Manual

Page 336: Roadside emergencies

background image

Stopping and securing the vehicle

1. Park on a level surface, set the
parking brake and activate hazard
flashers.

2. Place gearshift lever in P (Park)
and turn engine off.

Removing the spare tire and jack

If the 3rd row seat is stowed in the floor, you will need to unstow it to
access the spare tire and jack. Refer to Unstowing the third row seat in
the Seating and Safety Restraints chapter for this procedure.

1. Remove the carpeted floor panel
located in the rear of the vehicle,
remove the wing nut that secures
the spare tire by turning it
counterclockwise.

2. Lift and remove the spare tire
from the trunk.

3. Remove the second wing nut that
secures the jack retention bracket
by turning it counterclockwise,
remove the jack kit from the
vehicle.

4. Remove the jack, L-shaped bolt,
and the wrench from the felt bag.
Fold down the wrench socket to use
to loosen the lug nuts and to operate the jack.

Tire change procedure

WARNING: When one of the front wheels is off the ground, the
transaxle alone will not prevent the vehicle from moving or

slipping off the jack, even if the vehicle is in P (Park).

Roadside Emergencies

336

2011 MKT (mkt)
Owners Guide, 1st Printing
USA
(fus)