beautypg.com

Opening the power liftgate, Programming memory feature to transmitter, Locks and security – Lincoln 2011 MKT User Manual

Page 159

background image

Note: The panic alarm will only operate when the ignition is off.

Opening the power liftgate

Press

twice within three seconds to fully unlatch and open the

liftgate.

WARNING: Make sure all persons are clear of the liftgate area
before using power liftgate control.

In order to fully lower and latch the liftgate, press the control twice.

If the liftgate stops mid travel, it may have detected an obstacle, Check
to ensure the liftgate swing zone is free from obstruction and reset the
power assist by manually closing the liftgate. Normal operation can then
be resumed.

WARNING: Make sure the liftgate is closed to prevent exhaust
fumes from being drawn into the vehicle. This will also prevent

passengers and cargo from falling out. If you must drive with the
liftgate open, keep the vents open so outside air comes into the
vehicle.

Memory feature (seat, mirrors, adjustable pedals and steering
column

The Integrated Keyhead Transmitter (IKT) allows you to recall the
memory seat/power mirrors/adjustable pedals/steering column feature.

Press

to automatically move the seat, power mirrors, adjustable

pedals and steering column to the desired memory position. The mirrors
will move to the programmed position and the seat will move to the easy
entry position. The seat will move to the final position when the key is in
the ignition (if easy entry feature is enabled).

Programming memory feature to transmitter

To activate this feature:

1. Move the driver seat, power mirrors, adjustable pedal and steering
column to the desired positions using the associated controls.

Locks and Security

159

2011 MKT (mkt)
Owners Guide, 1st Printing
USA
(fus)