Life Fitness x3i - Manual (Page 24)

6. U
SER
M
ENU
24
6.1 O
VERVIEW
The User Menu on the Life Fitness x3 and x3i Consumer Cross-Trainers allows you to choose and vary specific features of the
cross-trainer. To enter and use the User Menu follow the instructions listed below.
6.2 E
NTERING USER MENU
The User Menu can only be used in the idle mode. Once you are in idle mode, you can enter by pressing the Pause/Clear
button twice and then pressing the Enter button. If this 3-button sequence is not completed within 4 seconds, the monitor returns
to Idle mode. Upon entering the User Menu, the monitor will beep three times and enter User Menu programming state #1.
Program State Setting Range Default Description
1 Pause Time 1-99 5 min. Number of minutes a work out is paused
2 Sleep Time 1-99/off Off Number of minutes before sleepmode is entered.
Off is defined as no sleep mode
3 Hold Time 1-99 5 Number of seconds before the display toggles to
the next parameter to be input by the user
4 Units Eng./Metric Eng. Sets units as english or metric
5 Software Displays current software revision
6.3 D
ESCRIPTION OF
U
SER
M
ENU
I
TEMS
• To navigate use the ENTER KEY
• To change any of the items use the (up) or (down) arrow keys, then press enter to accept & scroll
to he next item.
NOTE: