Life Fitness x3i - Manual (Page 23)

23
5.3.5 W
ORKOUT
, P
ROGRAMMING
1. If the user presses My Workout while the message center is displaying “PRESS ENTER TO EDIT NAME – PRESS MY
WORKOUT TO EDIT WORKOUT” The message center will then display “PRESS ENTER TO EDIT WORKOUT – PRESS MY
WORKOUT TO ACCESS STATISTICS”. – press Enter.
2. The message center will display “SELECT A WORKOUT”. The user will select a workout via the Workout Profile button or will
toggle through the workout profiles using the arrow buttons. Pressing enter will accept the profile.
3. The user will be prompted for data (necessary information for the particular program) just as if the user had selected the
profile normally (See section 5.2 for information needed for a particular program).
4. Upon acceptance of data by the last press of the Enter button the message center will display “WORKOUT SAVED” for 3
seconds.
5. The monitor will then return to Idle Mode.
6. If there are no key presses within 30 seconds, the monitor will exit programming mode and return to Idle mode. No workout
information will be saved and the message center will display the previously saved workout or the default display the next
time this mode is entered.
5.3.6
STATISTICS
,
DISPLAY
1. If the user presses the My Workout button when the message center is displaying “PRESS ENTER TO EDIT WORKOUT –
PRESS MY WORKOUT TO ACCESS STATISTICS” the monitor will show the statistics for the user chosen.
2. The display will toggle to the first statistic to be displayed which is to be accumulated Time.
3. Pressing the My Workout button will toggle the message center to the next statistics which is accumulated Calories.
4. Pressing the My Workout button will toggle the message center to the next statistic which is accumulated Distance.
5. Pressing the My workout button will exit the statistics display mode and return the monitor to Idle mode.
NOTE: If the user presses and holds the Pause/Clear button for 2 seconds while a statistic is being displayed then the
statistic being displayed will be cleared and reset to zero.
7. If there are no key presses within 30 seconds, the monitor will exit statistics display mode and return to Idle mode.