beautypg.com

Linksys SRW2016 User Manual

Page 88

background image

78

Chapter 5: Using the Web-based Utility for Configuration
SNMP Tab

WebView Switches

To add an member, click the paper and pencil icon. On the new screen that appears, you can configure all of the
fields from the Group Membership screen, along with the following:

Authentication Key. Defines the HMAC-MD5-96 or HMAC-SHA-96 authentication level. The authentication
and privacy keys are entered to define the authentication key. If only authentication is required, 16 bytes are
defined. If both privacy and authentication are required, 32 bytes are defined. Each byte in hexadecimal
character strings is two hexadecimal digits. Each byte can be separated by a period or a colon.

Privacy Key. Defines the Privacy Key (LSB). If only authentication is required, 20 bytes are defined. If both
privacy and authentication are required, 36 bytes are defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a period or colon.

Click the Submit button to add the new member.

Defining SNMP Communities

Access rights are managed by defining communities on the SNMPv1,2 SNMP Community screen. When the
community names are changed, access rights are also changed. SNMP Comminutes are defined only for SNMP
v1 and SNMP v2.

The SNMP Communities screen is divided into the following tables:

SNMP Communities Basic Table

SNMP Communities Advanced Tables

SNMP Communities Basic Table

Management Station. Displays the management station IP address for which the basic SNMP community is
defined.

Community String. Defines the password used to authenticate the management station to the device.

Access Mode. Defines the access rights of the community. The possible field values are:

Read-Only - Management access is restricted to read-only, and changes cannot be made to the
community.

Read-Write - Management access is read-write and changes can be made to the device configuration, but
not to the community.

Figure 5-74: SNMP - Communities

Figure 5-73: SNMP - add Group Membership

This manual is related to the following products: