Lenovo 4304493 - Manual (Page 34)

Warp Version 4
For Digital Audio (WAVE) setup:
1 Run STPM.EXE in the MMOS2 directory.
2 Select the Digital Audio tab. Then remove the check mark
from the Default Digital device.
3 Click on the + mark at the top right corner of the Digital Audio
window.
4 Select WAV in the Current extensions.
5
Move the cursor to the New extension. Then press the Space
bar and click on Remove.
6 Select the Digital Audio 2 tab. Then check the Default Digital
device.
7 Click on the + mark at the top right corner of the Digital Audio
window.
8 Type WAV at the New extension, and then click on Add.
9
Close Multimedia Setup.
For Sequencer (MIDI) setup:
1
Run STPM.EXE in the MMOS2 directory.
2 Select the MIDI tab. Then remove the check mark from the
Default Sequencer device.
3 Click on the
+ mark at the top right corner of the dialog
window.
4 Select MID in the Current extensions.
5 Move the cursor to the Next extension. Then press the Space
bar and click on Remove.
6 Select the MIDI 2 tab. Then check the Default Sequencer
device.
7 Click on the
+ mark at the top right corner of the dialog
window.
8 Type MID at the New extension, and then click on Add.
9 Close Multimedia Setup.
Part 2: User's Guide 2-23