Lenovo 4304493 - Manual (Page 30)

Version 4.0
1
Check that your computer and your CD-ROM drive are
connected correctly; turn on your computer and your CD-ROM
drive and start Windows NT 4.0.
2
Open My Computer in the desktop double-click on the SCSI
Adapter icon in the Control Panel.
3 Select the Driver tab; then click on the Add button.
4 Click on Have Disk in the Install Driver window.
5
Insert the Option Diskette (provided) into the diskette drive.
6 Check that the diskette drive (for example, A:\) has been
selected; click on OK.
7 Click on OK in the Install Driver window.
8
Check that the diskette drive (for example, A:\) has been
selected and click on Continue.
9 When the message Do you want to restart your computer
now? appears, remove the Option Diskette and click on Yes to
restart your computer.
You can now use the CD-ROM drive functions with Windows NT 4.0.
OS/2 Warp
1 Check that the your computer and your CD-ROM drive are
connected correctly, and turn on your computer and the
CD-ROM drive.
2 Insert the Option Diskette (provided) into the diskette drive.
3 Do one of the following, depending on your version:
Warp Version 3: Open OS/2 System, System Setup, and
Device Driver Install.
Warp Version 4: Open OS/2 System, System Setup,
Install/Remove, and Device Driver Install.
4 Click on Install.
5
Continue installation according to the instructions on the screen.
Click on Exit when installation is complete.
6 Do one of the following, depending on your version:
Warp Version 3: Open OS/2 System, System Setup, and
Selective Install.
Warp Version 4: Open OS/2 System, System Setup,
Install/Remove, and Selective Install.
7 Check the CD-ROM drive field in the System Configuration
window.
Part 2: User's Guide 2-19