Step 1. connecting the power source – Lenovo 4304493 User Manual

Page 17

Text mode
Original mode

Use the following steps to connect and install the software for the
CD-ROM drive. Refer to the illustrations of the top and bottom of the
drive (page 2-2) to identify the external connectors and controls.

Step 1. Connecting the Power Source

Select a power source to operate the CD-ROM drive:

AC adapter connected to a power outlet
Ni-Cd battery pack
Six AA alkaline batteries

This step also includes Ni-Cd battery pack recharging instructions.

Connecting the AC Adapter

To use the AC Adapter, do the following:

Make sure that the power switch of the CD-ROM drive is off.

Power Switch

Off

Attention

Do not use an AC Adapter other than the one provided. If
you do, you might damage the CD-ROM drive.

2-6 20X Max Portable CD-ROM Drive