Konica Minolta magicolor 2530 DL - Manual (Page 58)

Media Types 50
!"
If you have problems feeding 50 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, causing feeding problems.
!"
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
# Approved for laser printing
DO NOT use transparencies that
# Have static electricity that will cause them to stick together
# Are specified for inkjet printers only
Glossy
Test all glossy to ensure acceptable performance and to ensure that the
image does not shift.
DO NOT use glossy that is
# Mixed with any other media in the trays (as this will cause printer misfeed-
ing)
# Specified for inkjet printers only
Capacity Tray 1 Up to 50 transparencies, depending on their
thickness
Tray 2 Not supported
Orientation Face up
Driver
Media Type
Transparency
Duplexing Not supported
Capacity Tray 1 Up to 50 glossy sheets, depending on their
thickness
Tray 2 Not supported
Orientation Face up
Driver
Media Type
Glossy
Weight 60 to 90 g/m² (16 to 24 lb)
Duplexing Not supported