Konica Minolta magicolor 2530 DL - Manual (Page 118)

Solving Other Problems 110
Printer
returned to
READY
before the
configura-
tion menu
was
changed.
The printer was in the
configuration menu
structure without a
selection being made
within two minutes. When in the configuration menu struc-
ture, select your choice within 2 min-
utes.
Not all pages
print. The Cancel key was
pressed. Make sure no one pressed the Cancel
key while your job was printing.
The tray is empty. Check that the tray is loaded with
media, in place, and secure.
A document is printed
with an overlay file
which has been cre-
ated by a non-magi-
color 2530 DL driver. Print the overlay file using a magicolor
2530 DL driver.
Printer
resets or
turns off fre-
quently. The power cord is not
correctly plugged into
the outlet. Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
A system error
occurred. Contact Technical Support with the
error information.
Symptom Cause Solution