Konica Minolta magicolor 2530 DL - Manual (Page 134)

Introduction 126
Introduction
Note
Use of accessories not manufactured or supported by
KONICA MINOLTA will void your warranty.
!"
This chapter provides information about the following accessories.
Note
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
!"
For details on the available options, refer to
printer.konicaminolta.com.
Antistatic Protection
Note
Before opening and handling the dual in-line memory module (DIMM),
first touch a metal part of the printer to avoid an electrostatic charge
building up. When the DIMM is taken out of its conductive bag, hold it
by its edges to avoid touching the electronic circuits. When handling
the DIMM, be sure to place it on an anti-static mat or a piece of
aluminum foil.
Dual In-Line
Memory Module
(DIMM) Increases the printer's memory to assist with the
printing of complex graphics and large duplexed
pages.
Duplex Option Auto duplexing
Tray 2 500-sheet tray included
Dust Cover The dust cover is a standard feature in Europe, the
Americas and Taiwan, but an optional accessory in
other areas.