Kathrein UFS 640si - Manual (Page 65)

65
CONNECTING UP THE VIDEO/DVR
For details of how to connect your external recorder to the receiver refer to the connection diagram provided
at the end of this manual and the instructions for the external recorder.
In order to make a VCR recording (Record), the satellite receiver must be switched on or the timers must be
pre-programmed (see “EPG” “Recording (timer)” section).
For VCR/DVR playback you must have previously set the UFS 640si Scart socket to “VCR mode” (Scart
changeover), using the button, so that the signal path is set up from the VCR or DVR/AUX Scart socket
to the TV Scart socket.
In this setting, the picture from the external recorder is switched through to the TV set during playback.
Pressing the button again restores priority to the signal from the UFS 640si “Scart>Sat“.
The settings ”Scart>VCR” and ”Scart>Sat” are shown in the display of the receiver.
RECORDING
PLAYBACK