Kathrein UFS 640si - Manual (Page 24)

24
FIRST INSTALLATION: single-cable system (manual)
When the UAS 481 single-cable
feed system is being used, it is
essential that the LNB is set to
“Wideband”!
When the EXR 551 single-cable
switching matrix is being used, it
is essential that the LNB is set to
“Universal”!
Confi rm this display with the button. Then press the
button. You will be asked whether you wish to save
the changes. Use the buttons to select “Yes, save
changes” and confi rm by pressing the button. Now
press the
$
(green) button.
The receiver will automatically display the menu for the channel search. Continue by selecting the item
(“Perform channel search”).
Transmission channel
Use the buttons to select a free available transmission channel. A maximum of four transmission
channels are available (1400, 1516, 1632 and 1748 MHz).
Test connection
When you have set a free transmission channel, press the buttons to switch to the “Test connection”
selection fi eld, then press the button. The receiver now tests whether a connection to the single-cable
system can be established or not. As soon as the receiver has established a connection to the single-cable
system, you will see the following display:
Selection “UAS 481” or “EXR 551”
Check your settings and if necessary call for expert
help.
If no connection to the single-cable system could be established, the following display appears: