Kodak DX3900 - Manual (Page 52)

42
Chapter 5
Setting Video Out
The Video Out feature allows you to match the camera video-out signal to the
standard applicable in your area.
1 Turn the Mode dial to Setup .
2 Highlight the Video Out menu , then press Select.
3 Highlight the Video Out setting you want to
use.
NTSC (default)—standard used in most
countries except Europe. The United States
and Japan use NTSC.
PAL (EUROPE)—standard used in
European countries.
4 Press Select.
This setting remains until you change it.
Selecting a Language
The Language feature allows you to display the menus and screen messages in
different languages.
NOTE: In certain countries, the language menu is not available. These cameras
must be operated only in the language installed at the factory.
1 Turn the Mode dial to Setup .
2 Highlight the Language menu , then
press Select.
3 Highlight the Language setting you want to
use.
4 Press Select.
This setting remains until you change it.