Kodak DX3900 - Manual (Page 36)

26
Chapter 3
Setting Picture Sharpness
Use the Sharpness setting to highlight or blend the edges of the subject in
pictures.
1 Turn the Mode dial to Capture and press Menu.
2 Highlight the Sharpness menu , then press Select.
3 Highlight the Sharpness setting you want to
use.
SHARP—increases contrast on the edges of
the image. Ideal for improved image clarity,
or if you later want to crop or cut out
specific areas in the picture.
STANDARD (default)—use when no
special effect is needed. Ideal for everyday
pictures.
SOFT—softens the edges of the image,
creating a “soft focus” effect. Ideal for
portraits.
4 Press Select to accept the change and return to the Menu screen.
5 Press Menu to exit the Menu screen.
This setting remains until you change it unless Reset User Settings is set to
Yes (see
page 44 ).