Kenwood DDX8034BTM - Manual (Page 80)

80 DDX8034BT/DDX8034BTM
Tuner Setup (Reagion 2/ 3 models)
You can set Tuner related parameters.
Display the Tuner Setup screen 1
Touch [ ] > [ ] > [TUNER SETUP]. (page
59)
Set each item 2
[NEWS] Sets a news bulletin interrupt time.
( "OFF")
[AF] When station reception is poor,
automatically switches to the station that
is broadcasting the same program over the
same RDS network. (
"ON")
[Regional] Sets whether to switch to the
station only in the specific region using the
“AF” control. (
"ON")
[Auto TP Seek] When traffic information
station reception is poor, automatically
searches for a station that can be received
better. (
"ON")
[Language Select] Selects a display language
for the PTY function.
[Antenna Control SETUP] Allows you to turn
off the RDS function to prevent the motor-
driven antenna from extending. (
"ON")
TV Setup
The TV signal receiving areas can be set.
Displaying TV SETUP screen 1
Touch [ ] > [ ] > [TV SETUP]. (page 59)
Set each item 2
[On Screen TV] Sets an on-screen display of
the TV screen.
(
"Auto") (only when the optional accessory
TV tuner connected)
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
Setting up TV 3
Example : TV1 Area screen
Sets the present TV1 or TV2 receiving area.
Setup Menu