Audio control – Kenwood DDX8034BTM User Manual
Page 54
54 DDX8034BT/DDX8034BTM
Audio Control
Audio Control Menu
Displays the Audio Control menu to set the sound
effect function of this unit.
Display the Source Select Screen
1
SRC
Display the Audio Control menu
2
In this manual, the above selection is indicated
as:
Touch [
]
>
[
].
Select the Audio Control item
3
Item
Page
[Audio Control]
54
[Equalizer]
55
[EQ]
55
[Zone Control]
56
[SRS WOW]
56
[Surround Control]
57
[Position]
58
Audio Control
You can adjust the front/rear and right/left audio
balance.
Display the Audio Control screen
1
Touch [
]
>
[
]
>
[Audio Control]. (page 54)
Set each item
2
1
1
1
1 Adjusts the front/back and left/right
balance of the volume by touching the Adjust
screen.
[
2], [3] Adjusts the right and left volume
balance.
[
5], [∞] Adjusts the front and rear volume
balance.
[VOL.Offset] Finely adjust the volume of the
current source to minimize the difference in
volume between different sources.
⁄
If you have increased the volume first, then reduced
•
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
[Subwoofer Level] Adjusts the subwoofer
volume.
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.