Kenwood DDX8034BTM User Manual
Page 56
56 DDX8034BT/DDX8034BTM
Zone Control
You can set the front and rear audio source.
Display the Zone Control screen
1
Touch [
]
>
[
]
>
[Zone Control]. (page 54)
Set the Zone Control
2
[Single Zone] Turns off the dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
When the rear speaker sound is switched, the audio
•
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
There are following limitations when zone function is set
•
to "ON".
- There is no output from the subwoofer and the center
speaker.
-
(page 56),
(page 58),
and
SRS WOW Control
You can set up the SRS WOW effect.
Display the SRS WOW Control screen
1
Touch [
]
>
[
]
>
[SRS WOW]. (page 54)
Set the SRS WOW Control
2
1
1
1
1 Sets a SRS WOW.
You can select any of the following sound
fields.
"OFF"/ "LOW"/ "MIDDLE"/ "HIGH"/ "USER"
SRS WOW User Setup
Display the Audio SRS Adjust screen
1
Adjust the Audio SRS
2
1
1
1
1 Selects a speaker to be set (Front, Rear or
Center speaker).
[TruBass] Sets the TruBass effect level.
[FOCUS] Sets the FOCUS effect level.
[SRS 3D] Sets the SRS 3D effect level.
⁄
FOCUS: Adjusts the vertical position of the speaker and
•
sound image by virtual adjustment.
TruBass: Assists the playback for the super bass sound.
•
SRS 3D: Makes a natural 3D sound field.
•
Some items cannot be adjusted depending on the
•
selected speaker.
SRS WOW control is not available in tuner source and TV
•
source.
Audio Control