Hands free unit control – Kenwood DDX8034BTM User Manual
Page 44
44
DDX8034BT/DDX8034BTM
Hands Free Unit Control
Before Use
You need to register your cell-phone before using it with
•
this unit. For more details, see
If you have registered two or more cell-phones, you need
•
to select one of them. For more details, see
To use the Phone Book, it must be downloaded to this
•
unit in advance. For details, see
Downloading the Phonebook
Downloads the phonebook data from the
cell-phone to this unit so that you can use the
Phonebook of this unit.
By operating the cell-phone, send the
1
phonebook data to this unit
By operating the cell-phone, start the
2
hands-free connection
⁄
• For the cell-phones which support auto-download of
phonebook:
If the phonebook is not downloaded automatically for
some reasons, follow the procedure above to download
manually.
• For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
• Up to 1000 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetical characters. Fewer
characters can be input depending on the type of
characters.)
• Depending on the type of your cell-phone, the following
restrictions are placed:
- The phonebook data cannot be downloaded normally.
- Characters in the Phonebook are garbled.
- The phonebook data cannot be downloaded normally
if it contains images. It may take several hours to a full
day to download the phone book depending on the
total image size.
Various functions can be used in the Hands Free control mode.
• To cancel downloading of the phonebook data, operate
the cell-phone.
Receiving a Call
[
] Answering a Phone Call
[
] Rejecting an Incoming Call
During a Call
[
] Switches the voice output between
phone and speaker.
[DTMF] Outputs dial tone. See Tone-based Services> (page 48). [ ] Disconnecting a call Adjusting the Voice Volume during a Call