Kenwood DDX8034BTM - Manual (Page 37)

English 37
Source Control Screen
Switches to source control screen to use various
functions.
Display the Source 1 Control Screen
See Screen> (page 14).
Operation on the Source Control Screen 2
1 1 1
[BAND] Switches to TV1 or TV2.
[ 4], [¢] Select a channel.
Use the [SEEK] to change the channel tuning
sequence.
[List] Display the TV Preset List screen. (page
39).
[ ] Switches to the TV screen.
1 Information display
Channel information display
"TV" Band display
"Group" TV Area Group Display. See
Setup> (page 80).
"Preset" Memory Number Display
"ch" Channel display
[ ] When appears, the text display is
scrolled by touching it.
Multi Function
[1/2] Switches the multi function display.
[ ] Closes the multi function bar.
[AME] Selects the Auto Memory mode.
See (page 38).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[PRE] Lists and selects memorized station.
[NAME] Sets a name to the station. See
Station Name> (page 39).
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall channels on memory.
For memory of broadcasting stations, see
(page 38) or Memory> (page 38).