Kenwood DDX8034BTM User Manual
Page 48
48
DDX8034BT/DDX8034BTM
Controlling Tone-based Services
Uses tone base service using DTMF (Dual Tone
Multi Frequency).
Display the Talking screen
1
See
(page 46).
Display the DTMF input screen
2
You can send tones during a call
3
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
Display the Hands-Free Control screen
1
See
Display the Hands Free Setup screen
2
Set each item
3
[Auto Response] Sets an automatic response
time to pick-up an incoming call. (
"OFF")
"OFF": This function is disabled.
"0-99": Sets the incoming call ringing duration
(in seconds).
[Phone Voice] Sets the phone call voice /
ringing tone output position. (
"Front All")
"Front L": Outputs the phone call voice from
the front left-hand side speaker.
"Front R": Outputs the phone call voice from
the front right-hand side speaker.
"Front All": Outputs the phone call voice from
both front speakers.
Hands Free Unit Control