Kenwood KDC-M7024 User Manual
Page 39
Only stations whose reception is good are searched for in auto
seek tuning.
Display
Setting
"Local.S OFF"
The local seek function is OFF.
"Local.S ON"
The local seek function is ON.
Local Seek
Display and Setting
"NEWS OFF"
"NEWS 00MIN"
"NEWS 90MIN"
When "NEWS 00MIN" — "NEWS 90MIN" is set, the News
Bulletin Interrupt function is ON.
When the news bulletin starts, "News" is displayed, and it
switches to the news bulletin.
• If you choose the "20MIN" setting, further news bulletins will not
be received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
…
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
News Bulletin with Timeout Setting
Setting the central frequency boosted by B.M.S.
Display
Setting
"AMP Freq NML"
Boost with the normal central frequency
"AMP Freq Low"
Drop the normal central frequency 20%
B.M.S. Frequency Offset
Adjust the bass boost level of the external amplifier using the
main unit.
Display
Setting
"AMP BASS FLT"
Bass boost level is flat.
"AMP BASS +6"
Bass boost level is low (+6dB).
"AMP BASS +12"
Bass boost level is mid (+12dB).
"AMP BASS +18"
Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power amplifiers that
can be controlled from this unit.
• For amplifiers there are the model that can be set from Flat to +18
dB, and the model that can be set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the
unit, "AMP BASS +18" won't work correctly even if it's selected.
B.M.S. (Bass Management System)
— 39 —
KDC-M7024_U.S 02.12.11 3:02 PM Page 39