Kenwood KDC-M7024 User Manual
Page 29
Displays the current folder name.
3
Select the folder level
Press the [FM] or [AM] button.
With the [FM] button you move 1 level down and with the [AM]
button 1 level up.
Selecting a folder in the same level
Press the [
4] or [¢] button.
With the [
4] button you move to the previous folder, and with
the [
¢] button to the next folder.
Returning to the top level
Press the [4] ("HOME") button.
Scrolling the folder name display
Press the [SCRL] button.
4
Decide the folder to play
Press the [2] ("OK") button.
The Folder Select mode releases, and the MP3 in the folder
being displayed is played.
The methods for moving to other folders in the folder select mode
are different from those in the folder search mode.
See
Canceling the Folder Select mode
Press the [3] ("EXIT") button.
— 29 —
Attaching a title to a CD.
1
Play the disc you want to attach a name to
• A title can't be attached to a MD.
• Refer to the
"DNPS" display.
2
Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"NAME SET" is displayed.
3
Move the cursor to the enter character position
Press the [
4] or [¢] button.
4
Select the character type
Press the [2] — [4] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Button
Alphabet (Upper case/ Lower case)
[2] ("CAPS")
Numbers and symbols
[3] ("NUM")
Special characters (Accent characters)
[4] ("CHAR")
5
Select the characters
Press the [FM] or [AM] button.
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Media that you can attach names to
- Internal CD player: 30 discs.
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The name of a CD can be changed by the same operation you
used to name it.
Disc Naming (DNPS)
KDC-M7024_U.S 02.12.11 3:02 PM Page 29