Kenwood KDC-M7024 User Manual
Page 33
Synchronizing the data in this unit with the data in the GSM
telephone.
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "SYNC" is displayed above the
[3] button.
Refer to
2
Synchronize the data
Press the [3] ("SYNC") button.
The "SYNC" display turns off when data synchronization starts.
Phone Book/ Message (SMS) data synchronize
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "H-F" is displayed above the [2]
button.
Refer to
2
Enter Hands Free mode
Press the [2] ("H-F") button.
3
Select the SMS Mode
Press the [5] ("SMS") button.
"SMS Mode" is displayed.
4
Select the Message
Press the [FM] or [AM] button.
5
Switch the Display
Press the [
4] or [¢] button.
Each time the button is pressed the mode switches as follows:
SMS Mode item
Name/ Phone Number
Date
Message
When the display line of a message is
to "Scroll MANU", scrolling is possible with [
4]/[¢], and when
the setting is set to "Scroll Auto", scrolling is automatic.
Switching between the Name and Telephone Number
Press the [TI] button.
Scrolling the Name and Telephone Number display
Press the [SCRL] button.
6
Exit Hands Free mode
Press the [RTN] button.
When New Message is Received, "New MSG" is displayed.
SMS (Short Message Service) Mode
— 33 —
KDC-M7024_U.S 02.12.11 3:02 PM Page 33