Function set system – Kenwood DPX-6020 User Manual

Page 29

— 29 —

Function set system

To accommodate a greater number of functions, a function set
system has been employed for making settings. Press the FNC
button to enter the function set mode and then display the
function to make the setting.

Select the mode that you want to make the setting of the
function.

Press the FNC button.
"Function Set" is displayed when the function set mode is
entered.
The function that you can adjust is indicated with the current
settings displayed.

Selecting function to set
Press the

¢ button to search through the functions until you

see the one you want to adjust in the display.
Press the

4 button to search through the functions

backward.
Example: If you want to the setting of the touch sensor tone

function from on to off, first search through the
functions until you see "BEEP On" in the display.

Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from

on to off, and "BEEP Off" is displayed.

Ending the function set mode
Press the FNC button.

Function Set System

SRC

4 ¢

#3 #4

FNC

DISP

Function mode and setting display

AUTO indicator

DPX-6020_K_U.S 01.12.25 1:57 PM Page 29