Kenwood DPX-6020 - Manual (Page 26)

— 26 —
English
DSP features
Up to three sets of the DSP settings and conditions you
adjusted can be stored in the memory, and then you can recall
them with the single touch of a button.
Press the DSP button. "DSP CTRL" is displayed once the DSP
control mode is entered.
The DSP indicator blinks during the DSP control mode.
Make the DSP settings and adjustments that you want to store
in the memory.
Press the button (#1-3) that you want to use for the DSP
settings and adjustments for at least two seconds.
"DSP MEM#" blinks once in the display to indicate that the data
has stored.
Press the DSP button to end the DSP control mode.
Recalling a DSP settings and adjustments you stored:
Press the DSP button. "DSP CTRL" is displayed once the DSP
control mode is entered.
The DSP indicator blinks during the DSP control mode.
Press the preset button (#1-3) for the desired DSP settings and
adjustments.
Press the DSP button to end the DSP control mode. 3
2
1
4
3
2
1
DSP Setting Preset Memory
Graphic Equalizer features
4 ¢ FM
AM #3
#2
EQ
KBS
#1 DISP
DISP
EQ indicator
KBS name/Spectrum analyzer name/Equalizer frequency and level display
DPX-6020_K_U.S 01.12.25 1:57 PM Page 26