Kathrein UFC 861si - Manual (Page 87)

87
Use the buttons to select “OK” and pres the button to start merging the recordings. The receiver
merges the two recordings. The newly created single recording is assigned the name of the fi rst recording
you selected for merging.
You can use this function to protect recordings from being deleted when automatic hard disk management
is active (see “User Preference” section under “PVR Settings”, “DISK Management”).
Make sure you have also selected “Deletion block” with the (red) button.
Use the buttons to select the recording you want to protect and press the button.
The recording then has a “
*
” in front of its name indicating that it is protected against being deleted.
Press the button again to cancel the deletion block. The “
*
” disappears.
You can use this function to lock recordings. The recording can only be played back by entering the PIN.
Make sure you have also selected “Lock” with the (red) button.
This editing function is PIN code-protected. When you select the lock function you must enter the PIN
(factory setting: 0000).
Use the buttons to select the recording you want to lock, and confi rm by pressing
the button. The recording then has a padlock symbol in front of its name indicating that it is locked.
Press again to cancel the lock. The padlock symbol disappears.
RECORDING LIST
DELETION BLOCK
LOCK