Kathrein UFC 861si - Manual (Page 34)

34
Press the button and enter the unit ID here. This is useful for identifi cation in case of theft.
The alphanumeric input procedure is as described in the “Alphanumeric Inputs” section. In the
example shown here the ID “UFC 861” has been assigned.
CHANGE RECEIVER NAME
SETTING SYSTEM PARAMETERS
REMOTE CONTROL CODE
Use the buttons to select one of the four existing remote control codes. Once you have selected one
of the codes, the following display appears:
Confi rm the displayed message with the button. The next time you switch on your UFC 861, it will display
the following message (example): RCU 2 (Exit + 2). Now, you just have to change your remote control code
to RCU 2. To do this, simultaneously press the remote control keys EXIT and 2 for a period of two seconds.
The remote control code has now been switched to RCU 2.