Kathrein UFC 861si - Manual (Page 72)

72
RECORD
If there is an overlap with another scheduled or ongoing recording, this fact is indicated. The receiver
then presets the end time for your new recording as the start time of the overlapping programme
(see “Duration/End” at the right).
Decoding
Here you can use the buttons to select whether the programme should be recorded uncoded
(selection “On”) or encrypted (selection “No”) on the hard disk.
Selecting “On” means depending on the setting in the menu “System parameters” “Common Interface”
“Multiple decoding”, you may not be able to view any other encrypted channels that use to same CA module
for decoding (see Chapters “System parameters” “Common Interface” “Multiple decoding”).
Start
Press the (red) button. The following display appears:
RECORDING DIRECT TO HARD DISK IMMEDIATELY/LATER
- You can record the programme immediately. To do this, use the buttons to reach the “Start
recording” selection fi eld and there use the buttons to change the setting to “Immediate”.
- You can also start recording at a later time. Use the with the buttons to move to the “Start Record”
fi eld and use the buttons to select the time after which you want recording to start. You can
choose between 1 minute and 119 minutes, in 1 minute increments.