Kathrein UFC 861si - Manual (Page 103)

103
INSTALLATION MENU
MANUAL SEARCH
Start frequency:
Use the buttons to select the start frequency for the search.
End frequency:
Use the buttons to select the end frequency for the search.
Network Search:
Use the buttons to select the setting for the network search.
If you set the network scan to “On”, the networking of the transmission channels enables additional
transmission channels that have not yet been saved to be located. They are then saved and searched for
new channels in the same way as the existing channels.
If you set the network scan to “Off”, only the frequency you selected will be searched (see screenshot above,
page 21 - page 41).
Select FTA and/or CI:
Use the buttons to select whether you want to search through all channels or only FTA (Free to Air)
or CI (= Common Interface - encrypted channels).
Start Search:
When you have made your selection, use the buttons to select “Start Search” and press the
button to start the search.
The on-screen displays during and after the end of the search are the same as for the “Automatic Search”