Kenwood B60-5632-00 00 MA (E - Manual (Page 17)

17 EN
8 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys
to select the appropriate Surround speaker setting.
If you have selected “LRG” as the Center speaker setting:
1 SURR NML (normal) : Average size Surround speakers are
connected to this model.
2 SURR LRG (large) : Large Surround speakers are connected
to this model.
3 SURR OFF : Surround speaker setting mode to this
model is OFF.
If you have selected other than “LRG” as the Center speaker
setting:
1 SURR NML (normal) : Average size Surround speakers are
connected to this model.
2 SURR OFF : Surround speaker setting mode to this
model is OFF.
• When the setting “SURR OFF” is selected, the procedure skips
to step !.
9 Press the SETUP key to accept the setting.
• The Surround Back speaker setting indication “BS” appears.
0 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys
to select the appropriate Surround Back speaker setting.
If you have selected “LRG” as the Surround speaker setting:
1 BS NML (normal)
: Average size Surround Back speaker is
connected to this model.
2 BS LRG (large) : Large Surround Back speaker is
connected to this model.
3 BS OFF : Surround Back speaker setting mode to
this model is OFF.
If you have selected “NML” as the Surround speaker setting:
1 BS NML (normal)
: Average size Surround Back speaker is
connected to this model.
2 BS OFF : Surround Back speaker setting mode to
this model is OFF.
(KRF-V6100D only)
If you have selected “NML” or “LRG” as the Surround Back
speaker setting:
1 SPEAKER : Surround Back signal will be output from
SURROUND BACK speaker terminal and PRE OUT
SURR BACK L/SURR BACK jack as monaural.
2 PRE OUT : Surround Back signals will be out put from PRE
OUT SURR BACK L/SURR BACK and PRE OUT
SURR BACK R jacks as stereo.
! Press the SETUP key again to accept the setting.
• The Subwoofer re-mix setting indication “SW RE-MIX” scrolls
across the display.
• If Subwoofer is turned OFF, Subwoofer re-mix setting is not
visible.
@ Use the MULTI CONTROL knob or MULTI CONTROL %/fi
keys to select the appropriate Subwoofer re-mix setting.
1 RMX ON : Subwoofer re-mix set mode to this model is ON.
2 RMX OFF : Subwoofer re-mix set mode to this model is OFF.
# Press the SETUP key to accept the setting.
5
When the “CUSTOM” has been selected.
1 For general speaker setting, use the MULTI CONTROL knob or
MULTI CONTROL %/fi keys to select “CUSTOM” and press
the SETUP key again.
• The Subwoofer setting indication “SUBW ON” appears.
2 Use the MULTI CONTROL knob or MULTI CONTROL %/fi
keys to select the appropriate Subwoofer setting.
1 SUBW ON : Subwoofer setting mode to this model is ON.
2 SUBW OFF : Subwoofer setting mode to this model is OFF.
• The initial setting is “SUBW ON”.
• When the setting “SUBW OFF” is selected, the Front speakers
are automatically set to “FRNT LRG” and the procedure skips to
step
5.
Before step 5, press the SETUP key to accept the setting.
• When Subwoofer output sound is required, select “FRNT NML”.
3 Press the SETUP key to accept the setting.
• The Front speakers setting indication “FRNT LRG” appears.
4 Use the MULTI CONTROL knob or MULTI CONTROL %/fi
keys to select the appropriate Front speakers setting.
1 FRNT LRG (large) : Large Front speakers are connected
to this model.
2 FRNT NML (normal) : Average size Front speakers are
connected to this model.
• For “FRNT LRG” selection, no sound will be heard from
Subwoofer speaker even when it is set to ON. However, if you
select “SW RE-MIX ON” when Subwoofer is selected, you will
be able to hear sound from the Subwoofer.
When in STEREO mode, the sound goes directly to Front
speaker.
5 Press the SETUP key to accept the setting.
• The Center speaker setting indication “CNTR NML” appears.
6 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys
to select the appropriate Center speaker setting.
If you have selected “LRG” as the Front speakers setting:
1 CNTR NML (normal) : An average size Center speaker is
connected to this model.
2 CNTR LRG (large) : A large Center speaker is connected to
this model.
3 CNTR OFF : Center speaker setting mode to this
model is OFF.
If you have selected “NML” as the Front speakers setting:
1 CNTR NML (normal) : An average size Center speaker is
connected to this model.
2 CNTR OFF : Center speaker setting mode to this
model is OFF.
7 Press the SETUP key again to accept the setting.
•The Surround speaker setting indication “SURR NML” appears.
Preparing for surround sound
Continued to next page
5632_16_25_EN 06.4.20, 2:00 PM 17