Kenwood eXcelon KDC-X789 - Manual (Page 5)

English | 5
Preset Memory
Putting the frequency and channel in the memory.
1 Select the band
Press the [FM] or [AM] button.
2 Select the frequency and channel to put in the
memory
Press the [
4] or [¢] button.
3 Put the frequency and channel in the memory
Press the desired [1] — [6] button for at least 2
seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory
on each [1] — [6] button.
Preset Tuning
Calling up the frequency and channel in the
memory.
1 Select the band
Press the [FM] or [AM] button.
2 Call up the frequency and channel
Press the desired [1] — [6] button.
⁄
• "Linking" will be displayed for few seconds until it is
received.
• When (page 4) is set to Digital or
Analog, it cannot be received if the setting is differed
from the preset.
Auto Memory Entry
Putting a station with good reception in the
memory automatically.
1 Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2 Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
Save 6 stations with the best reception in the
memory and close Auto Memory Entry.
⁄
• Sub channel of Digital FM cannot be registered.