Maintenance work on chassis and engine – KTM 450 SMR User Manual
Page 60

MAINTENANCE WORK ON CHASSIS AND ENGINE
58
Fitting glass fiber yarn filling of main silencer
x
500226-11
ಥ
Check parts for damage and wear. Replace damaged or worn parts.
ಥ
Attach the glass fiber yarn filling to inner tube
. Fit the inner tube into the outer
tube
.
ಥ
Insert cap
. Mount and tighten screws.
ಥ
Attach the glass fiber yarn filling to insert
. Fit the insert into the outer tube
.
Mount and tighten screws.
ಥ
Insert end cap
. Mount and tighten screws.
ಥ
Fit the main silencer. (
P. 57)
Changing glass fiber yarn filling of main silencer
x
ಥ
Remove glass fiber yarn filling of main silencer. (
P. 57)
ಥ
Fit the glass fiber yarn filling of the main silencer. (
P. 58)
Dismounting the air filter box lid
500222-10
ಥ
Pull off the air filter box lid in area
to the side and remove to the front.
Installing the air filter box lid
500222-11
ಥ
Check parts for damage and wear. Replace damaged or worn parts.
ಥ
Insert the air filter box lid into the rear area
and clip it into the front area
.
Removing the air filter
x
Note
Engine failure
ಗUnfiltered intake air has a negative effect on the service life of the engine.
ಥ
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard
ಗProblem materials cause environmental damage.
ಥ
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
ಥ
Dismount the air filter box lid. (
P. 58)
500223-10
ಥ
Undo the hose clip
.
ಥ
Remove the air filter.