Kodak DX6440 - Manual (Page 32)

20
Chapter 2
Liveview—Framing with the Camera
Screen
When you turn on Liveview, the camera screen displays a live image of what the
lens sees. Use the camera screen to frame your subject.
IMPORTANT: Liveview quickly depletes battery power; use it
sparingly.
1 Turn the Mode dial to any On position.
2 Press the OK button to turn on Liveview.
3 Frame your subject in the camera screen.
To use the auto focus framing marks, see
page 21 .
4 Press the Shutter button half-way and
hold
to set the exposure and focus, then
press the rest of the way down to take
the picture.
5 To turn off Liveview, press the OK button.
NOTE: If Quality is set to Best (3:2), the
Liveview image is displayed at a 3:2
aspect ratio, as shown, with a black bar
at the top of the screen.
To change the Liveview setting so that it is on whenever the camera is on, see
page 65 .
OK Framing marks