Upgrading your software and firmware, Tips, safety, maintenance – Kodak DX6440 User Manual
Page 119
107
Chapter 12
Upgrading Your Software and Firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera).
Visit
Tips, Safety, Maintenance
!
Always follow basic safety precautions. Refer to the “Important Safety
Instructions” booklet packed with your camera.
!
Do not allow chemicals, such as suntan lotion, to come into contact with
the painted surface of the camera.
!
If the camera has been subjected to inclement weather or you suspect
water has gotten inside the camera, turn off the camera and remove the
battery and card. Allow all components to air-dry for at least 24 hours
before using the camera again. If this does not resolve the problem,
contact customer support (
).
!
Clean the lens and camera screen:
1
Blow gently on the lens or camera screen to remove dust and dirt.
Set Album (Still)
Off
Shutter Sound
On
Slide Show Interval
5 seconds
Slide Show Loop
Off
Storage Location
Auto
Video Date Display
None
Video Out
NTSC
White Balance
Auto
Feature
Factory Setting