Kenwood KDC-6015 - Manual (Page 33)

• OK button
During station name input, stores the already input data in
memory and ends the input mode.
During Station name preset play mode, selects station.
• DNPP button
Enters and cancels the Station Name Preset Play mode.
• 38 button
Enters and cancels the Program Type Selection (PTY) mode.
Selects the type of characters at the time of entering the station
name.
• Number/ letter entry buttons (KDC-X615 only)
Press buttons #1-6 to recall preset stations.
Use to enter letters (alphabetical) during station name preset.
• 4/¢ (TUNE) buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the
¢ button to make increasing seeks (using the preset
tuning mode).
Use to move the cursor left or right during station name input.
• AM/FM button
Press the AM button to select the AM band.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
During station name input, selects digits and symbols.
Tuner features
Press the
+
button to turn the volume up.
Press the
–
button to turn the volume down.
• SRC button
Each time you press the SRC button, the mode switches as
follows:
• The mode switches to the next mode from any mode which
cannot be used.
• The external disc control mode will differ depending on the unit
that is connected.
• ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning the volume up, or
turning it all the way down deactivates the attenuator function.
NOTE
▼
Tuner mode
▼
CD mode
▼
External disc control mode
▼
Standby mode
— 33 —
KDC-X615_U.S_K_r6 00.12.26 3:45 PM Page 33