beautypg.com

General features – Kenwood KDC-6015 User Manual

Page 10

background image

Function of the KDC-X615

Storing your sound settings:

Press a preset button (#1-6) for at least two seconds except
during the bass center frequency, bass level, bass quality
factor, bass extension, treble center frequency, and treble level
adjust mode.

• This setting can be made only when the Sound coordinate

system is on. (page30)

• The settings you can preset are, bass center frequency, bass

level, bass quality factor, bass extension, treble center
frequency, and treble level.

NOTE

"V OFFSET/VOS" : Set the sound level of the each source

selected by adjusting the level difference
between the basic sound level and the
required level.

Setting values: - 8 – ± 0

Function of the KDC-X615

"NF Phase" : Adjust the phase for Non-Fading output.

Setting values: Normal (0°) / Reverse (180°)

This mode is available only when the non-fading output function
is set to on.

NOTE

Function of the KDC-X615

"LPF NF" : Adjust the frequency of the Low-pass filter for Non-

Fading output.

Setting values: 50 Hz / 80 Hz / 120 Hz / Through

This mode is available only when the non-fading output function
is set to on.

NOTE

Function of the KDC-X615

"HPF R" : Adjust the frequency of the High-pass filter for rear

output.

Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /

150Hz / 180Hz / 220Hz

You can separately set the high-pass filter for front and rear
output,including preouts. The high-pass filter works except during
non-fading preout when switching to non-fading. The factory
default settings for front output and rear output are "through" .

NOTE

Function of the KDC-X615

"HPF F" : Adjust the frequency of the High-pass filter for front

output.

Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /

150Hz / 180Hz / 220Hz

You can separately set the high-pass filter for front and rear
output,including preouts.The high-pass filter works except during
non-fading preout when switching to non-fading.The factory
default settings for front output and rear output are "through" .

NOTE

General features

— 10 —

English

KDC-X615_U.S_K_r6 00.12.26 3:45 PM Page 10