Konica Minolta IC-202 - Manual (Page 99)

3 Setting Up Network Printing
3-30 IC-202
Setting the Macintosh computer
Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.
2
Reminder
For network settings, consult the network administrator.
For printer driver installation, refer to “Installing the Printer Driver” on
page 2-1.
Since Bonjour (a Mac OS X 10.4 function) is always enabled, it is not re-
quired to change the settings. Bonjour/Rendezvous is a Mac OS X func-
tion. For Mac OS 9.2, connect using AppleTalk.
For Mac OS X
1
On the Apple menu, select [System Preferences].
2
Click the “Network” icon.
3
From “Show”, select [Built-in Ethernet].
4
Click the TCP/IP tab.
5
Select the items from “Configure” that correspond to the network set-
tings for the Macintosh computer that is connected to the network, and
then set the IP address and subnet mask.
6
If using an AppleTalk connection, click the AppleTalk tab, and then
check that the [Make AppleTalk Active] check box is selected.
7
Click the close button at the top left of the dialog box.
The “Apply configuration changes?” message appears.
8
Click the [Apply].
The changed settings are saved.