Konica Minolta IC-202 - Manual (Page 95)

3 Setting Up Network Printing
3-26 IC-202
3.8 Printing With Macintosh
This section describes this machine’s settings and the Macintosh network
settings.
Specify the printer network port settings after installing the printer driver and
when selecting a printer. To select a printer, refer to “Selecting a Printer” on
page 2-33.
Operations on This Machine
Set the IP address for this machine. For the setting procedure, refer to “Set-
ting the IP Address for This Machine” on page 3-5.
In PageScope Web Connection, specify the AppleTalk or Bonjour settings.
2
Note
The setting here is made with Windows. When the setting is made with
Macintosh, however, refer to the Web browser corresponding to “Oper-
ation Environment” on page 1-8.
Specifying the AppleTalk Settings
When connecting this machine to a Macintosh computer using AppleTalk,
the AppleTalk settings must be specified.
1
Start up PageScope Web Connection.
– To log out if the login page does not appear, click the [Logout].
2
In the login page, select [Administrator], and then click the [Login].
3
Enter the administrator password, and log in to the Administrator
mode.