Specifications – Kenwood KRF-V6090D User Manual

Page 32

For your records

Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.

Model_____________________ Serial Number_____________________

Specifications

Caution : Read this page carefully to ensure safe

operation.

For the U.S.A and Canada
AUDIO section

Rated power output during STEREO operation

Effective power output during SURROUND operation

FRONT (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel driven)

............................................................................... 100 W + 100 W

CENTER (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel driven)

.............................................................................................. 100 W

SURROUND (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel driven)

............................................................................... 100 W + 100 W

SURROUND BACK (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel
driven) (VR-906) .................................................................. 100 W

Total harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8Ω)
Frequency response (IHF‘66)

CD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dB

Signal to noise ratio (IHF’66)

CD/DVD ................................................................................. 95 dB

Input sensitivity / impedance

CD/DVD, DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2

.............................................................................. 550 mV / 47 kΩ

Output level / impedance

MD/TAPE REC ....................................................... 550 mV / 1 kΩ
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩ
PRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 kΩ

Tone control

BASS ................................................................ ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)

Loudness control

VOLUME at -30dB level ................................... +8 dB (at 100 Hz)

For other countries
AUDIO section

Rated power output during STEREO operation

DIN/IEC (63 Hz ~ 12.5 kHz, 0.7 % T.H.D., at 8 Ω

Ω

Ω)

............................................................................... 100 W + 100 W

Effective power output during STEREO operation

(1 kHz, 10% T.H.D., at 8Ω) ....................................... 120 W + 120 W

Effective power output during SURROUND operation

FRONT
(1 kHz, 0.7% T.H.D., at 8Ω one channel driven) .... 100 W + 100 W
(1 kHz, 10% T.H.D., at 8Ω one channel driven) ..... 120 W + 120 W
CENTER
(1 kHz, 0.7% T.H.D., at 8Ω one channel driven) ....................... 100 W
(1 kHz, 10% T.H.D., at 8Ω one channel driven) ........................ 120 W
SURROUND
(1 kHz, 0.7% T.H.D., at 8Ω one channel driven) .... 100 W + 100 W
(1 kHz, 10% T.H.D., at 8Ω one channel driven) ..... 120 W + 120 W
SURROUND BACK (KRF-V6090D)
(1 kHz, 0.7% T.H.D., at 8Ω one channel driven) .................... 100 W
(1 kHz, 10% T.H.D,. at 8Ω one channel driven) ..................... 120 W

Total harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8Ω)
Frequency response (IHF‘66)

CD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dB

Signal to noise ratio (IHF’66)

CD/DVD ................................................................................. 95 dB

Input sensitivity / impedance

CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 47 kΩ
DVD/6CH INPUT .................................................. 550 mV / 15 kΩ

Output level / impedance

Tone control

BASS ................................................................ ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)

Loudness control

VOLUME at -30dB level ................................... +8 dB (at 100 Hz)

DIGITAL AUDIO section

Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length

Optical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nm
Coaxial ................................................................... 0.5 Vp-p / 75 Ω

VIDEO section

VIDEO inputs / outputs

VIDEO (composite) ................................................. 1 Vp-p / 75 Ω

S-VIDEO inputs / outputs

(KRF-V6090D)

S-VIDEO (luminance signal) .................................. 1 Vp-p / 75 Ω
S-VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 Ω

COMPONENT VIDEO inputs/outputs (except for VR-905)

COMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/CR-signal)

VR-906 ......................................................... 0.64 Vp-p / 75 Ω
KRF-V6090D/KRF-V5090D ........................... 0.7 Vp-p / 75 Ω

FM tuner section

Tuning frequency range ................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)

VR-906/VR-905

................. 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)

KRF-V6090D/KRF-V5090D

................... 1.6 µV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)

50dB quieting sensitivity

STEREO ..................................................... 28 µV (75 Ω)/ 40.2 dBf

Total harmonic distortion (1 kHz)

MONO .......................................................... 0.5% (71.2 dBf input)
STEREO ....................................................... 0.7% (71.2 dBf input)

Signal to noise ratio (1 kHz, 75 kHz DEV.)

MONO ........................................................ 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)

Stereo separation (1 kHz) ........................................................... 40 dB
Selectivity (±400 kHz) VR-906/VR-905 ...................................... 70 dB
KRF-V6090D/KRF-V5090D .................... 50 dB
Frequency response .................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dB

AM tuner section

Tuning frequency range

10 kHz step (VR-906-VR-905) ..................... 530 kHz ~ 1,700 kHz
10 kHz step (KRF-V6090D/KRF-V5090D) ....... 530 kHz ~ 1,610 kHz
9 kHz step (KRF-V6090D/KRF-V5090D) ......... 531 kHz ~ 1,602 kHz

Usable sensitivity (30% mod., S/N 20 dB) (VR-906/VR-905)

........................................................................ 16 µV / (600 µV/m)

Usable sensitivity (KRF-V6090D/KRF-V5090D) ....... 16 µV / (600 µV/m)
Signal to noise ratio (30% mod. 1 mV input)

.......................................................... 50 dB (60 dBµV EMF input)

GENERAL

Power consumption

VR-906/VR-905 .................................................................... 2.2 A
KRF-V6090D/KRF-V5090D .................................................. 280 W

Standby Power consumption

VR-906/VR-905 .................................................. less than 0.4 W
KRF-V6090D/KRF-V5090D .................................. less than 1.3 W

AC outlet

SWITCHED
VR-906/VR-905 .................................. (total 150 W, 1.25 A max.)
KRF-V6090D/KRF-V5090D .............................. (total 90 W max.)

Dimensions .................................................... W : . 440 mm (17-5/16")

H : 143 mm (5-5/8")
D : 303 mm (11-15/16")

Weight (Net)

VR-906/VR-905 ..................................................... 7.7 kg (17.0 lb)
KRF-V6090D/KRF-V5090D ................................... 8.8 kg (19.4 lb)

Notes

1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

100 watts per channel minimum RMS, both channels driven, at 8Ω from
40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)

04.11.26, 5:34 PM

This manual is related to the following products:

VR-905