Kenwood DNX SERIES DDX6046BT - Manual (Page 53)

English 53 DDX SERIES DDX616/DDX6046BT/DDX516
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
Display the Hands-Free Control screen 1
See (page 49).
Display the Hands Free Setup screen 2
Set each item 3
[Auto Response] Sets an automatic response
time to pick-up an incoming call.
(
DNX6960/ DNX6160/ DNX6020EX/
DNX6460BT/ DDX616/ DDX6046BT : "OFF"
DNX5160/ DDX516 : "8")
"OFF": This function is disabled.
"0-99": Sets the incoming call ringing duration
(in seconds).
[Call Beep] Sets the beep of the incoming call.
( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[SMS Receive Beep] Sets the beep of the
incoming SMS. ( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list,
incoming calls list and missed calls list.
(
"ON")
"ON": Yes.
"OFF": No.
[SMS Use] Sets the SMS function. ( "ON")
"ON": Use SMS function.
"OFF": SMS not available.
[Key Word] Registers the voice to select phone
number category with voice recognition.
See (page 55).
[Use Phone Voice Recognition]
Sets whether to dial using the phone voice
recognition function. (
"ON")
[Echo Cancel Level]* Adjusts the level of echo
cancelling function. ( "15")
[Microphone Level]* Adjusts the sensitivity of
the microphone for a telephone call. ( "8")
[Noise Reduction Level]* Adjusts the level
of the noise reduction and the quality of the
resulting speech signal. (
"4")
[Restore]* Restores the [Echo Cancel Level],
[Microphone Level], or [Noise Reduction Level]
value to the initial value.
⁄
Either the time interval for automatic answer set on this •
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
* The items with asterisk (*) are not appeared on the
•
following models:
DNX5160 and DDX516