beautypg.com

Hands-free phoning – Kenwood DNX SERIES DDX6046BT User Manual

Page 47

background image

English 47

DDX SERIES DDX616/DDX6046BT/DDX516

Hands-Free Phoning

Before Use

You need to register your cell-phone before using it with

this unit. For more details, see unit> (page 70).
If you have registered two or more cell-phones, you need

to select one of them. For more details, see Unit Connection> (page 72).
To use the Phone Book, it must be downloaded to this

unit in advance. For details, see Phonebook> (page 47).
The units supporting the Bluetooth function have been

certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its
type.
For the cell-phones verified for compatibility, access the

following URL:
http://www.kenwood.com/cs/ce/bt/
Sound output speaker can be set. See

Hands-

Free/Audio Output Setup> (page 72).

Various functions can be used in the Hands Free control mode.
The following models need to connect the optional Bluetooth unit KCA-BT200:
DNX5160 and DDX516

• You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the

Bluetooth Unit as well.

• To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of

your Bluetooth Unit and your cell-phone.

Downloading the Phonebook

Downloads the phonebook data from the
cell-phone to this unit so that you can use the
Phonebook of this unit.

By operating the cell-phone, send the

1

phonebook data to this unit

By operating the cell-phone, start the

2

hands-free connection

• For the cell-phones which support auto-download of

phonebook:
If the phonebook is not downloaded automatically for
some reasons, follow the procedure above to download
manually.

• For how to operate the cell-phone, refer to the

Instruction Manual that comes with your cell-phone.

• Up to 1000 phone numbers can be registered for each

registered cell-phone.

• Up to 25 (DNX5160/DDX516 : 32) digits can be registered

for each phone number along with up to 50* characters
representing a name.
(* 50: Number of alphabetical characters. Fewer
characters can be input depending on the type of
characters.)

• Depending on the type of your cell-phone, the following

restrictions are placed:
- The phonebook data cannot be downloaded normally.
- Characters in the Phonebook are garbled.
- The phonebook data cannot be downloaded normally

if it contains images. It may take several hours to a full
day to download the phone book depending on the
total image size.

• To cancel downloading of the phonebook data, operate

the cell-phone.